Step into the future/past of death and decay with these modular FDM printable terrain sets.
- project industria
- Industrial Underhive 1.0
- Industrial Underhive 2.0
Trench of death #2
The complete original set
This time a modular trench tile system set.
Unlike the previouse version this set doesn’t require the use of XPS foam. Just print, paint, add basing and it is ready to use, to create your trench battlefield.
Printing
1 tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 45minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 37 tiles:
18 different trench tiles
9 different room tiles
8 battlefield tiles (+ some test tile files)
2 bunker tiles
Remasterd original tiles
I added an improved ground texture and magnet holes to this set of tiles.
This set doesnt recuire the purchase of the complete original set.
Printing
1 tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 45minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This set contains 24 remasterd tiles from the ’trench of death #2 – basic original version’.
1st Varriant tiles
This set contains 12 1st varriant tiles.
This set doesnt recuire the purchase of the ‘complete original set’.
Printing
1 tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 45minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 12 tiles:
9 different trench tiles
3 bunker tiles
2nd Varriant tiles
This set contains 13 2nd varriant tiles.
This set doesnt recuire the purchase of the ‘complete original set’.
Printing
1 tile will recuire an avrage of 100gr / 33meter of PLA. With the standard parameters I used, it takes about 3hours and 10minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 13 tiles:
8 different trench tiles
5 bunker tiles (1 base bunker tile in 5 varriant tiles)
4th Varriant tiles
This set contains 7 4nd varriant tiles.
This set doesnt recuire the purchase of the ‘complete original set’.
Printing
1 tile will recuire an avrage of 100gr / 33meter of PLA. With the standard parameters I used, it takes about 3hours and 10minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 7 tiles:
7 different trench tiles
Varriant battlefield tiles
This set contains 10 varriant battlefieild tiles.
This is made to combine with trench of death #2 sets’.
Printing
1 tile will recuire an avrage of 100gr / 33meter of PLA. With the standard parameters I used, it takes about 3hours and 10minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 10 tiles:
10 different battlefield tiles
Valley tiles
This set contains 20 valley tiles.
This is made to combine with trench of death #2 sets’.
Printing
1 tile will recuire an avrage of 100gr / 33meter of PLA. With the standard parameters I used, it takes about 3hours and 10minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 20 tiles:
20 different valley tiles
Hull down tile set
This set contains 20 valley tiles.
This is made to combine with trench of death #2 sets’.
Printing
1 tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 10 minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version.
Inventory
This basic set contains 4 tiles:
2 hull down tank trench tiles
2 tank ramp tiles
Decoration (free)
Printing
Inventory
Ammo & weapon boxes and fuel barrel.
